The Cleanest Water
UltraPure™ Automatic Water Cleaners™ provide a "Nature Fresh" Bottled Water Bathing Experience. Water balance is easily maintained. Filter runs are longer since clogging greases and oils are broken down. Scumline or bathtub rings are kept away or easily brushed off. Overall pool water maintenance and care are minimized.
The Least Work
UltraPure™ Automatic Water Cleaners™ produce the strongest oxidizer available, (Ozone), to do the oxidation work normally attempted by Chlorine (or Bromine). Obnoxious combined Chlorine compounds are eliminated. Chlorine then only provides a "free available" residual. All problems and wasted chemicals associated with combined Chlorine are eliminated.
The Fewest Chemicals
Chlorine usage is lowered by 65% with an UltraPure™ Automatic Water Cleaner™, as are pH adjusting chemicals. The following chemicals are virtually eliminated:
- "Shock" Treatments
- Scumline Cleaners
- Filter Degreasers
- Clarifiers
- Scale Inhibitors
- Scents
- Filter Aids
Please note: Never premix Yellow Out with chlorine or any other chemicals. Add Yellow Out to the pool, wait five minutes and add chlorine to the pool.
Replaces super chlorination and destroys irritating & odorous chloramines. Won't bleach vinyl, improves your water quality and allows you to swim sooner.
Directions For Use
Read entire description and use in accordance with precautionary statements and directions.
Regular use of this product will oxidize most of the organic contaminates that result from bather load, skin, mucous, urine, cosmetics, leaves and wind blown matter. These containminates react with Free Chlorine and form Combined Chlorine, which is a form of chlorine that is inneffective as a pool water sanitizer. This product will also react with any non-living contaminates which exert a chlorine or bromine demand and regular use will ensure that the sanitizer used to disinfect the pool water will remain in the pool in its "free" and "active" form.
This product is not asanitizer or an algaecide. For routine disinfection, use an EPA Registered Product according to label directions.
How To Use
- For the initial treatment, add this product at the rate of 2 pounds per 10,000 gallons of water, in order to ensure breakthrough oxidation.
- Subsequent treatment for normal bather load should be made once a week at a rate of 1 pound per 10,000 gallons of water.
- For heavily contaminated pools, more frequent treatment may be required.
How To Apply
Broadcast the required amount of this product uniformly over the surface of the pool water, adding two-thirds of the total dose over the deep end of the pool. Run the circulation system for at least 12 hours to ensure proper distribution. For best results, apply this product when no swimmers are in the pool, preferably at night.
For Spas
Apply 2 ounces of this product (3 tablespoons) per 500 gallons of water weekly. Add more often if bathing load is heavy. Sprinkle the product over the spa water surface while the circulation pump is in use. This product works best when added to the spa after bathing.
- Quick dissolving shock oxidizer, buffer, and clarifier
- Multi-functional shock treatment