Swimming Pool Liners.com

STAIN SOLUTION #1 - The Iron, Cobalt & Spot Etching Stuff - 2lb. (STAIN SOLUTION #1) is a non-acidic product for removing iron, cobalt, and spot-etching stains from all types of pool surfaces without draining the pool. The Iron, Cobalt & Spot Etching Stuff will normally remove these stains easily and effectively within 48 hours, with minimal re-balancing of other pool chemical products.

(STAIN SOLUTION #2) is designed to safely and effectively remove copper stains and scale from all types of pool surfaces without draining the pool. In most cases, The Copper & Scale Stuff is more effective than acid washing the pool, and will save both time and money. Please Note: must bypass heater when using this product.

Stain Free is an all-natural stain remover. It's like Vitamin C for your pool!Stainfree is an ascorbic acid product, similar to everyday VitaminC. It is ideal for treating staining to vinyl pool liners and fiberglass pool surfaces. A safe and people friendly alternative to harsh chemicals typically used to treat stains. The bonus is that Stainfree does not create any residual phosphates in your pool water, making it the perfect stain-fighter for use with Natural Chemistry's PHOSfree program! 1lb per 10,000 Gallons.

Concentrated super strength mineral remover used in pools and spas to control copper, iron and manganese. Also dissolves calcium scale and helps to remove stubborn stains. For vinyl or gunite pools. Maintenance dose 1 oz. Per 5,000 gallons.

The Blue Stuff™ does everything the Pink Stuff™ does and more. The Blue Stuff's proprietary blend actually removes copper from the water. It is also very stable in higher chlorine levels and can be used in many fountain and water feature applications.Intial Dose(for Existing Pools) Add one quart(32 oz) per 10,000 gallons of pool water. In problem water areas, two quarts are recommended.Maintenance/PreventativeMaintenance levels for The Blue Stuff are 10 - 12 ppm. To determine the amount to add to achieve this level, have pool water tested on a weekly basis.

REVIVE! Superior PHOSPHATE REMOVER and More! NATURALLY restores water quality...

• Removes orthophosphates up to 2000 ppb
• Removes Copper & Iron up to 2.0 ppm
• Clears water of organic Debris
• Captures scaling Carbonates

REVIVE!™ is an excellent initial water treatment to eliminate potential problems in new pools, spring starts and well-source water. REVIVE!™ is a superior spot treatment to clean out phosphates (algae food), copper, iron, scaling carbonates, organic debris or other clouding matter when you need to clear water fast and clear water sure. Note: If algae growth is present, shock or otherwise treat to kill algae before applying REVIVE!™ Directions for use: Turn off circulation pump. Attach spray bottle togarden hose. Spray contents of bottle over the entire pool surface. Allow phosphates, metals and other debris to sequester and settle to bottom of pool for 12 hours, then circulate pool water through the filter for 12 more hours. Vacuum debris slowly to waste (preferred) or filter. If water clouds after vacuuming, filter water for 24 hours or until clear and vacuum again. Return to normal operating procedures. Wait 3 days before retesting phosphate level. NOTE: Vacuuming through filter (if necessary) will require frequent flushing. Clean or back flush filter if pressure exceeds normal operation limits until vacuuming is complete and/or water is clear. Contains: Highly concentrated formula. Contains Aluminum Poly-Chlorides and other natural minerals that are safe when used as directed. Not for human consumption. Non-hazardous in this concentration. Disposal: Use entire contents and/or tighten lid and place in trash. Do not use container for any other purpose. First Aid: In case of skin or eye contact rinse with water. If any irritation occurs, seek medical attention. Do not take internally. When do I need REVIVE™? Ideal for SPRING OPENINGS and IN-SEASON problems: Phosphate build-up in-season and/or redundant algae problems..Shut off pump and treat with REVIVE™ according to directions. After vacuuming and general clean-up, resume normal operation. REVIVE™ is compatible with all other swimming pool products.Opening with suspected phosphate problems and/or algae problems last season...Test for phosphate presence and if level is over 125 ppb, top off water and circulate for at least 2 hours. Then shut off pump and treat with REVIVE™. A filter clean is also recommended after this treatment.Opening with algae and/or cloudy: Recommend chlorine shock to kill algae. Wait 24 hours, shut off pump, then brush walls; followed by treatment with REVIVE™. Vacuuming to waste will remove the deal algae as well as the phosphate (algae food) an all other debris, leaving the water crystal clear and algae free. A filter clean is also recommended after this process. This treatment will reduce the likelihood of future algae problems for summer!Well Water...Opening now pool or re-opening pool:After pool is filled, circulate water for 2 hours and shut off the pump. Treat with REVIVE™ to remove phosphates, iron, copper, organic debris, and scaling carbonates... all associated with well water and problems

Metal Remover

The Pink Stuff™ is a professional strength, general purpose sequestering agent. The Pink Stuff™ is the most recommended start-up product in the swimming pool industry and is perfect for controlling plaster dust.

For the removal of Metal Stains (iron, copper and manganese). For use in all pools. 2 lbs treats 15.000 gallons.

Professional strength stain remover especially designed for severe staining problems on walls, floors and fixtures. Safe for all pool surfaces. Wont affect water chemistry. 1 lb per 10,000 gallons.

Works on surfaces without scratching. Restores surfaces to like new.

Works on surfaces without scratching. Restores surfaces to like new.

Prevents metal stains and scale in new pools. Aids in the removal of metal stains and continued use of this product helps to prevent stains from returning. 1 quart treats 15,000 gallons.

Lo-Chlor Tile & Vinyl Cleaner

• Specially Formulated for Spa and Swimming Pool Use
• Use on any Surface
• Removes waterline marks
• Grimy build up and scale.
• Excellent cleaner for D.E. and Cartridge filter grids.
• Comes in convenient quart spray bottle

Directions for use:Spray TILE & VINYL directly on the area to be cleaned. Scrub the area briskly with a brush then rinse with water. SAFETY DIRECTIONS:Strongly alkaline. Avoid contact with skin and eyes.

Use to remove existing rust or scale from your pool. May also be applied to your pool when opening as a preventative measure to stop the formation of rust and scale. Add 1 quart per 20,000 gallons. Maintain by adding 5oz. per 15,000 gallons each week.

A liquid chelating agent designed to stop the formation and remove existing rust and scale. Use as a preventative measure when you open your pool by adding 1 quart per 20,000 gallons. Maintain by adding 5 oz per 15,000 gallons each week.

Prevents scale formation. With AquaPill’s patented delivery system, you’ll never have to measure or store your chemicals again! Simply pierce the capsule with the pin provided and place the capsule in your pool’s skimmer. When the color disappears, discard the capsule. The right amount of chemical is dispensed each and every time.High levels of calcium hardness can lead to damaging scale deposits on pool surfaces, piping, filtration and heating systems. Regular use of AquaPill Scale Inhibitor will ensure optimum performance of pool equipment by controlling the buildup of mineral scale. AquaPill Scale Inhibitor contains a non-toxic polymer, which prevents calcium precipitation. It is released into the water circulation system where calcium scale formation can be most damaging. Use bi-weekly for trouble-free pools.

Removes stains caused by copper, iron and manganese. With AquaPill’s patented delivery system, you’ll never have to measure or store your chemicals again! Simply pierce the capsule with the pin provided and place the capsule in your pool’s skimmer. When the color disappears, discard the capsule. The right amount of chemical is dispensed each and every time.Metals such as iron, copper and manganese can cause staining or discoloration of underwater surfaces if present in the water supply or due to corrosion of pool equipment. AquaPill Stain Remover helps dissolve the precipitated stain and restore the appearance of the surface. Once dissolved, it helps to prevent a recurrence of the problem. Use at the first sign of a problem. This product will work better if the pH is close to 7.2 and the chlorine level is 1ppm or less. This product is safe to use in all types of pools, with all types of sanitizers and will not affect the overall water chemistry. Use bi-weekly for trouble-free pools.

Inhibits the growth of all types of algae. With AquaPill’s patented delivery system, you’ll never have to measure or store your chemicals again! Simply pierce the capsule with the pin provided and place the capsule in your pool’s skimmer. When the color disappears, discard the capsule. The right amount of chemical is dispensed each and every time.Water that contains trace amounts (0.5 ppm or less) of iron, copper or manganese can lead to staining problems after reacting with other pool chemicals. AquaPill Stain Preventer helps sequester these heavy metals and prevents the precipitation that leads to staining and water discoloration. Use this product at the start of every season in order to avoid the staining problem. If well water or water that is known to contain heavy metals is used, it is best to add the product at twice the recommended dosage. For continuing protection, add a maintenance dose on a monthly basis and prior to the addition of any new make up water. This product will work better if the chlorine level is 3 ppm and the pH is 7.8 or higher. This product is safe to use in all types of pools and with all types of sanitizers.

• Removes Iron, Copper & Manganese
• Prevents Staining
• Saltwater Compatible
• No Measuring
• No Storing
• No Waste
• Treats up to 10,000 Gallons

This product helps prevent discoloration of pool water due to iron,calcium, manganese,copper and other metals and minerals which may be present in the water supply. This product is an excellent general purpose sequestrant which helps protect plumbing and pools walls from rust, stain and scale. It should be used for all pool openings and closings and throughout the season as needed.

Pool Stain Treat®'s Spotting Bag® is a NEW concept in stain removal. By simply placing a Spotting Bag® directly over a stain, and pinning it down with a pool brush, without scrubbing or rubbing -- the stain will disappear within 24 hours.The Spotting Bag® will: Remove rust marks. Remove copper marks. Minimize any damage to the surface. Clean the spots while you relax. The Spotting Bag® is made from the same powerful formula used in Pool Stain Treat®. This products proven performance has made the talk of professionals.The Pool Spotting Bag® are effective on. Plaster (marcite), vinyl, fiberglass and painted pools. Rust marks made by bobby pins, BBs and toys. Outside areas of rebard bleed. Copper fallout from shocking. General brown and blue metal stains. Leaf and Organic Stains.