Swimming Pool Liners.com

Patches are manufactured from the same extra-strong mesh material as our safety swimming pool covers. Warning: Do not use on holes or tears larger than 3 inches. Self adhesive - no tools required. Patch size: 4" x 8". 3 per pack

Includes everything you need to find and repair leaks in and around your pool.Kit Includes

Leak Locating Dye, which is a dark blue solution that will collect at the point of water loss.

Leak Sealer to help seal minor leaks in pool pipes.

Vinyl Pool Repair Kit that will mend small cracks and tears underwater.

Peel and Patch for mending wet or dry vinyl.

Lo-Chlor Leak Sealer Benefits

• Seals minor leaks in most swimming pools & spas
• Can seal leaks losing up to 1" of water per day
• No need to empty pool or spa
• Fast acting - usually stops leaks in 24 hours

Important Notes

• NOT suitable for repairing leaks in vinyl liner pools
• Larger defects require proper plumbing and maintenance
• This product should not be used when the rate of water loss exceeds 1" per day in a 15,000 gallon pool
• If using an automatic pool cleaner, remove the cleaner from the pool
• Do not allow Leak Sealer to pass through filtration system
• Do not exceed recommended dosage rate

Sizes

• Quarts

Dosage

• One quart treats 15,000 gallons pool water

What is Lo-Chlor Leak Sealer? Lo-Chlor Leak Sealer is an amazing special compound that has been developed to help seal minor cracks and leaks in swimming pools. A leaking pool is every pool owner's nightmare. Lo-Chlor has developed an easy way to plug minor leaks. How does Leak Sealer work? Leak Sealer has a very high pH (about 12) so when you add it to your pool it takes on the pH of pool water (between 7.0 and 8.0). It now no longer functions as a liquid and starts to solidify in the presence of oxygen at the site of the leak. To ensure best results, please follow the instructions outlined below. Instructions

Turn the pool pump OFF. Set the filtration to BY-PASS or RECIRCULATE to avoid the Leak Sealer passing through the filtration system elements when the pump is running. If by-pass or re-circulate is not available, remove filter grids or cartridges from the filter... Leak Sealer will clog the filter system if allowed to pass through it.

If leak location is unknown, add the required volume of Leak Sealer via the skimmer box. Turn the pump off for at least 30 minutes. This allows the Leak Sealer to work slowly through the pipes (this is where 90% of leaks happen, so it makes good sense to allow maximum contact time in this area). If you are sure of the location of the leak, (ex. around a light or the skimmer) pour Leak Sealer directly in the water in the vicinity of the leak.

Where possible, attach a vacuum hose with vacuum head resting at the deepest point in the pool (normally next to the main drain). Leak Sealer is much heavier than water, so it tends to sink quickly to the deepest point in the pool. The positioning of the vacuum head in this region will assure maximum effect of the product when the pump is turned back on.

After 30 minutes have passed, turn the pump on. Allow pump to run for at least 8 hours (24 if possible).

The pool should be checked to see if it is still losing water. Minor leaks may benefit from a second application where the leak appears to have slowed but not sealed completely from the initial application. Second application can be made within the next 24 hours.

Replace the filter grids or cartridges after 24 hours and resume normal filtration.

Seals minor leaks in pool pipes, extending the life of the filter system. Leak sealers dual action formula first stops and then seals the leak with a waterproof glaze. Add directly to your pool skimmer or main drains. Add 1 quart per 17,000 gallons of water.

A formulation specifically designed to help you find an area of water loss. A dark colored blue solution that collects at the point of water loss to indicate the leak area. Non-toxic, safe to use. Our Money Back Guarantee: if you are unable to find the leak using this product & you purchase a new replacement liner with us, we will refund you the price of this product. Directions: You need to lower the water level down to almost where the leak is. You cannot just put the solution on the top and expect it to go to the bottom. 8oz bottle.

Complete vinyl patch repair kit. Many other uses for patching all vinyl products such as inflatables, household items (vinyl furniture), etc. Bonds patch and original vinyl together. For underwater & dry use. High strength and fast drying. Comes with 260 sq. in. transparent vinyl patch and glue. (two 5-3/4in. x 24in. patches), 4 fl. oz. vinyl adhesive and dauber applicator.

Vinyl Patch Applicator

• Allows for easy repair of holes underwater
• Easy application
• Fits a telescopic pole with easy clips located on side of applicator
• Includes 12 self adhesive patches measuring 2.8 inches x 1.9 inches

Mends small cracks and tears underwater. Each pack includes 2 ounces of vinyl adhesive, dauber and two 3.5" x 12" vinyl patching.

Ideal for use with above ground pool assemblies, covering up wall seams.

Contains 100 square inches of vinyl patching. These pressure sensitive patches make perfect mends on either wet or dry vinyl. Just remove backing and apply. Handy adhesive back vinyl repair strips make vinyl liner repair a snap! Also can be used with inflatables and most vinyl applications. Easy to use -- No mess!

Includes 100 sq inches of peel and stick patching material.

Includes 75 sq. inches of easy to use, no mess, peel & patch woven strips. These repair patches can be used on most winter pool covers to fix holes and small tears.EASY TO USE!Clean & dry area thoroughly where repair is to be made.Remove paper backing, place over hole or tear and PRESS DOWN FIRMLY.Bond improves after several hours.

Mends small cracks and tears underwater. Each pack includes 2 ounces of vinyl adhesive, dauber and two 3.5" x 12" vinyl patching.