Swimming Pool Liners.com

System Overview: The SSF housing mounts on the outside of the pool wall. A Starbright pump provides pressure and water circulation in the system. Flow path: water in the pool is skimmed from the top surface(about 4 inches - 5 inches deep) over a weir gate, down into he filter housing, around and through a pleated cartridge filter(flow path outside to inside). The water then flows through an outlet at the bottom of the filter housing, through flex hose to the pump inlet. The flow path is completed through a flex hose return line from the pump outlet to a fitting in the pool wall, where the clean eater is discharged. This Kit contains a Complete Cartridge Filter system, pump, and all the necessary fittings for installation of a Starbright Skim Filter(SSF) System IN AN ABOVEGROUND POOL. Includes:

• 2 - Hook-up Hose Pieces
• 4 - Adjustable Hose Clamps
• 4 - 1 /1/2 inch Threaded Connector Fittings
• 1 - 3/4 HP Pump
• 1 - StarBright Skimmer with cartridge and vacuum plate

The Renegade In-Ground Vinyl Pool Skimmer is designed to work with all existing vinyl liner steel, polymer or fiberglass pool walls. Renegade includes a lock-down vacuum plate, extension collar and one of the largest skimmer baskets available. It twist-locks to prevent floating and easy-access. Renegade spring-loaded weir door makes replacements a snap.

THE POOL SENTRY™ is used to maintain the water level of a pool, spa or pond automatically and unattended. When the Pool Sentry is removed from the box, it is easily assembled by threading the fill tube into the float valve. Snap the fill tube and float valve into the base and fill the base with small rocks or pea gravel. Next, snap the top cover onto the base and attach the garden hose (not included). Finally, adjust the float to the desired position.The water stays on at all times when the Pool Sentry is in the pool. As the float drops, the water turns on. When the float reaches its set height, the water shuts off. You can adjust the float to any desired level, usually a point halfway on the tile line or skimmer.Because the hose is under constant water pressure, it is essential that you use a heavy-duty, reinforced hose.

Save time and money with a Self Winterizing Skimmer and make closing your pool a snap. The winter lid snaps on with 16 snap clips so you will not have to lower your water level when you close your pool or conduct repair work on your filter. The lid protects your skimmer from the winter freeze while saving gallons of water and precious chemicals. Includes complete skimmer, return fitting, gaskets, winter plate and hardware.

Save time and money with a Self Winterizing Skimmer and make closing your pool a snap. The winter lid snaps on with 16 snap clips so you will not have to lower your water level when you close your pool or conduct repair work on your filter. The lid protects your skimmer from the winter freeze while saving gallons of water and precious chemicals. Includes complete skimmer, return fitting, gaskets, winter plate and hardware.

Hayward quality. Heavy-duty non-corrosive body will fit most models. Contoured body and patented weir gives superior skimming action. Complete with return fitting and skim vac attachment.Outer Dimensions: 8 3/8" x 8 1/8"Inner Dimensions: 5 7/8" x 5 3/8"

Thru-Wall skimmer for above ground pools. Complete with gaskets, weir (flapper) door, skim vac attachment, return fitting and directional eye. Skimmer fits all filtration systems including Hayward, Jacuzzi, Pacfab, Waterway, ect.Outer Dimensions: 8 3/8" x 141/2"Inner Dimensions: 5 7/8" x 11 1/2"

Thru-Wall skimmer for above ground pools. Complete with gaskets, weir (flapper) door, skim vac attachment, return fitting and directional eye. Skimmer fits all filtration systems including Hayward, Jacuzzi, Pacfab, Waterway, ect.Outer Dimensions: 8 3/8" x 8 1/8" Inner Dimensions: 5 7/8" x 5 3/8"

Install Aquador™ and youll never have to drain you pool again to winterize it. Simply replace the existing skimmer plate with the Aquador™ face plate, and the snap-on plastic lid positively seals the skimmer and protects it from damage. Saves thousands of gallons of water each year. Saves on chemicals. Saves work, time and money. Aquador™ pays for itself many times over.

The Skim-Master Surface Skimmer easily attaches to filter intake hose. Venturi induced whirlpool action skims floating debris, leaves, hair, lint, insects, etc. from pool water surface. Removable strainer basket, corrosive resistance hardware, heavy duty molded components. Adjustable aluminum brackets for pool ledge sizes from Splasher Pool of 1/2" to Deluxe Family Pools with 7" ledges. Flow valve controls water flow for greater efficiency in skimming action. Uses a 1 1/4" hose.

Install Aquador™ and youll never have to drain you pool again to winterize it. Simply replace the existing skimmer plate with the Aquador™ face plate, and the snap-on plastic lid positively seals the skimmer and protects it from damage. Saves thousands of gallons of water each year. Saves on chemicals. Saves work, time and money. Aquador™ pays for itself many times over.

Install Aquador™ and youll never have to drain you pool again to winterize it. Simply replace the existing skimmer plate with the Aquador™ face plate, and the snap-on plastic lid positively seals the skimmer and protects it from damage. Saves thousands of gallons of water each year. Saves on chemicals. Saves work, time and money. Aquador™ pays for itself many times over.

Install Aquador™ and youll never have to drain you pool again to winterize it. Simply replace the existing skimmer plate with the Aquador™ face plate, and the snap-on plastic lid positively seals the skimmer and protects it from damage. Saves thousands of gallons of water each year. Saves on chemicals. Saves work, time and money. Aquador™ pays for itself many times over.

Install Aquador™ and youll never have to drain you pool again to winterize it. Simply replace the existing skimmer plate with the Aquador™ face plate, and the snap-on plastic lid positively seals the skimmer and protects it from damage. Saves thousands of gallons of water each year. Saves on chemicals. Saves work, time and money. Aquador™ pays for itself many times over.

Install Aquador™ and youll never have to drain you pool again to winterize it. Simply replace the existing skimmer plate with the Aquador™ face plate, and the snap-on plastic lid positively seals the skimmer and protects it from damage. Saves thousands of gallons of water each year. Saves on chemicals. Saves work, time and money. Aquador™ pays for itself many times over. Dimensions: 8 1/2" x 8 1/4"

Get a Skim-It™ skimmer aid and virtually eliminate hand skimming. Skim-It™ extends the reach of your skimmer by 2 additional feet, thereby increasing its effectiveness. The Skim-It™ has no metal parts to corrode and it installs in minutes on most skimmers made. (Your skimmer must have a weir door set back at least 1 in. from front opening). So add a Skim-It™ to your list and work less on your pool.

Replaces Hayward® 1082c

• Turns your skimmer into a filter
• Keeps filter cleaner, longer
• Inexpensive and easy to use

Vac Plate used for vacuuming Pool to catch debris in skimmer basket.

This is a part for a Hayward 1090 Skimmer. Includes 6" diameter vac plate and 1½ barbed fitting.

Frogs, snakes, bugs and worse – they all find a way to your skimmer basket. The new Skimmer Angel allows you to remove your basket without ever getting your hands wet, avoiding the critters, even the ones you can't see. The Skimmer Angel attaches to the bottom of your skimmer basket using two provided screws. The handle sits above the waterline and below the skimmer lid so it's always there when you need it.

Benefits:

• Installs in minutes to any skimmer basket using 2 provided screws.
• Handle sits above the waterline and below the skimmer lid.
• Weighted plastic sinks the skimmer basket.
• Stays on the basket so its always there when you need it.

Part for in-wall Skimmer made to fit Kayak® Pools manufactured between 1984 - Present.

Gasket for standard wide mouth skimmers. Measures 14" x 5 3/4" on the inside lines.

Prevent larger foreign objects from getting trapped in your skimmer. Quick and Easy No Tools, Snap in installation! Fits most standard above ground & in-ground wall skimmers. Use two skimmer screens for wide mouth skimmers.

Replacement Gasket for Standard Skimmer

Replacement Gasket includes skimmer and return gasket for a wide mouth skimmer.Inside Diameter 11¾" x 5-1/8"

12 screws per set.

Replacement skimmer face plate. Replaces Hayward SP1090D, seasonmaster S006 and Olympic ACM 85ABS face plates.

Replacement skimmer support for a standard sized skimmer.

Economy Wide Mouth Skimmer Screw Set

Cover Plate for InGround Skimmer